Note, you will need the be on the following updates of Trezor in order to connect to ShapeShift:
Trezor One v1.8.0 or higher | Trezor T v 2.1.0 or higher
We're excited that the ShapeShift Platform is integrated with Trezor! To get started, please follow the steps in the video! If you prefer directions in text, simply scroll down.
Click the drop-down arrow at the top right corner of the page. Select “Connect a Wallet” or "Switch Wallet" if you've previously paired another device.
If you previously had another hardware wallet paired with the platform, this message will appear. Read, click the checkbox, and click “Switch Wallet”. (If you don’t see this message, please move onto the next step).
You will be redirected to the Trezor website. Click “Export”.
Note: If you are setting up a Trezor for the first time, you will need to install the Trezor Bridge and follow the prompts.
Enter your PIN and click “Confirm”.
Your Trezor is connected to ShapeShift! Click “Continue”.
Lastly, scroll down and click “Finish Setup”.
You should be redirected to the dashboard and in the top right you should see that your Trezor is connected. If you are not redirected, type this into the URL bar: https://beta.shapeshift.com/dashboard and hit "Enter".
You should now be all set! If you have any trouble, please reach out to our Support Team. If you have any issues with your Trezor wallet rather than the ShapeShift interface, please contact Trezor's Support Team.